Safe plus Sound health
Temporary Tooth Filling
Zinc oxide based material
Sufficient for around 10 fillings
Net weight 3g
Important
Tooth filling is not an adhesive and will not bond to the surface of the tooth.
The cavity must have sufficient undercut for the material to key into position and to hold in place once hardened.
Avoid over-filling the cavity with tooth filling material as this may cause a high point. This high point may result in undue pressure on the material during chewing or eating, causing it to crumble.
To allow material to harden correctly, gently close jaws in a comfortable position for around 15 minutes and avoid over salivation and touching the material with the tongue.
Instructions:

1) Place a small amount of tooth filling into cavity and gently bite into place, or use enclosed spatula to pack material into cavity.
2) Do not over fill cavity as any high points, protruding into the biting area, may cause temporary filling to crumble. The correct amount will allow jaws to close normally, without teeth from opposing jaw touching the material.

3) Avoid biting, chewing or over salivation for 15 minutes.

4) Always seek qualified dental advice as soon as possible and do not use for very large or very painful fillings.
5) Do not put unused material back into container.